The Format4 Creator 950 is a through-feed CNC machining centre for carcass components; as the workpiece passes through, it drills vertically and horizontally and routes. Since the workpiece is not held by vacuum, the machine does not need a vacuum pump. Year of manufacture 2018.

Visible in the photos of this machine: drilling head with vertical and horizontal spindles (drill bits fitted in some of the chucks), main routing spindle, brush extraction hood around the head, central tubular guides between the two table halves, hold-down rollers on swing arms, a rail with four fork holders (empty in the photos), an extraction connection on the enclosure roof (with cylinder and linkage) and a foot switch. A vibratory bowl dowel feeder stands beside the machine on a separate mobile stand. Control via a computer with a monitor in the front wall.

The machine was in our service department in December 2025 undergoing used-machine preparation — among other things, bearings and the magnetic switch were replaced; an aluminium support roller is also on the service order. The interior shows normal signs of use (dust, occasional surface rust on bolts), the sheet metal is well preserved. Working dimensions and the number of spindles will be checked together during the viewing.