New · Year 2024
MULTI Press RPGL 2530
- Maximum clamping area: approximately 2900 × 2080 mm
- Pressure force per cylinder: up to 2000 kg
14.467,00 €+ VAT
Lift and tilt table
BARTHkippLIFT
Lifting and tilting heavy parts without an assistant.
New · Year 2024 · In stock in Ljubljana
Doors, worktops and large parts are placed flat, lifted hydraulically to working height and tilted when needed — without an assistant and without risk to your back.
Computer rendering
The table, lifted and tilted by your scrolling.
The film is a computer rendering, made from photographs of our unit and the maker’s video. It illustrates how the table works; the figures are in the chapters and the technical data.
Up close
The machine in detail.
Computer renderings of selected units, made from photographs of our unit. They illustrate the construction; the figures are in the chapters and the technical data.
The worktop slides out and is tilted by hand up to 80°; the workpiece, here a door, stays on it. 
The slid-out worktop above the scissor lift, and the foot pedal on the long side of the table. 
The foot pedal of the hydraulic lift; the table has one on each long side. 
The fold-down stop rail with its hinge, and the red lock at the edge of the worktop. 
The perforated worktop: the grid of holes and the plies of the plywood edge. 
Front view with the stop rail raised.
Hydraulic lift
A height of 600 to 1,260 mm.
You set the height with a foot pedal, from either long side of the table. Place the workpiece low, then lift it to the height that suits you.
Manual tilt
A tilt of up to 80°, no motor.
You pull the worktop out until the workpiece’s centre of gravity is over the pivot on the long side of the table, then tilt it. Dampers support the movement. The tilt is manual: from horizontal up to 80°.
Load capacity
350 kg lifted. 120 kg tilted.
The table lifts up to 350 kg, as the nameplate on the machine also states. When tilting, the permitted weight is lower, up to 120 kg: leave heavier parts flat or ask us.
- Lifting capacity
- 350kg
- Tilting capacity
- 120kg
Stop rail
A stop rail that folds away.
A folding stop rail under the edge of the worktop makes it easier to unload heavy parts.
On wheels
Wheel it up to the machine.
The table stands on sturdy wheels that can be braked. It serves as a work, assembly or infeed surface beside machines.
Viewing and testing
In stock in our showroom.
The table is new, built in 2024, and stands in our showroom at Tacenska cesta 25. Viewing and testing take place by arrangement.
- Year of manufacture
- 2024
- Condition
- New
Photos
Up close.
This machine in our showroom in Ljubljana.
The kippLIFT table in the showroom The worktop pulled out past the base The foot pedals 
The underside of the worktop
At a glance
In numbers.
Every figure comes from this machine's data.
- Lifting capacity
- 350kg
- Tilting capacity
- 120kg
- Working height
- 600–1,260mm
- Tilt range
- 0–80°
- Worktop
- 2,000 × 1,015mm
- Presser adapters
- 10
- Weight of the machine
- 221kg
Specifications
Every technical detail.
Grouped by area. Search for a value or open a group.
Lift, load capacity and tilt
7
- Največja nosilnost pri dvigu
- 350 kg
- Največja nosilnost pri nagibu
- 120 kg
- Nagib delovne površine
- 0–80°
- Nastavljiva višina
- 600–1260 mm
- Hidravlični dvig z nožnim pedalom
- Fitted
- Upravljanje višine z obeh vzdolžnih strani
- Fitted
- Ročni mehanizem za nagib (premik teže delovne plošče)
- Fitted
Work surface
3
- Delovna površina
- 2000 × 1015 mm
- Work surface for Barth table 2.000 × 1.015 × 30 mm (BH-30-29-2010)
- Fitted
- 10 × adapter for clamp — pin (BH-12-38)
- Fitted
Mobility
1
- Mobilna izvedba na robustnih kolesih
- Fitted
Dimensions and weight
1
- Weight
- 221 kg
Machine
5
- Manufacturer
- BARTH
- Model
- kippLIFT
- Year of manufacture
- 2024
- Condition
- New
- Category
- Workbenches — Hydraulic lift tables
BARTH in stock
Three machines for one workshop.
The BARTH machines currently in stock in our showroom. The price applies to each machine separately.
New · Year 2024
kippLIFT
- Hidravlični dvig z nožnim pedalom
- Upravljanje višine z obeh vzdolžnih strani
4.981,00 €+ VAT
You are viewing this machineMachine page
New · Year 2024
vakuuLIFT-S SET
- Obračanje obdelovanca: 0–90°
- Nastavljiva višina: 550–1150 mm
5.712,00 €+ VAT
Buy
In stock in Ljubljana.
Viewing and test run by appointment.
BARTH kippLIFT
New · Year 2024 · In stock in Ljubljana
Price
4.981,00 €+ VAT
Send enquiryCall +386 41 636 207
Download quote (PDF)Mon–Fri 8:00–16:00
When you buy the machine
- Delivery, installation and training on request, charged separately
- Available immediately from stock — a new machine made to order depends on the manufacturer's lead time.
- In stock at our premises in Ljubljana — viewing and test run by appointment.
Showroom
We show you the machine in person; bring your own material. Tacenska cesta 25, Ljubljana-Šentvid, Mon–Fri 8:00–16:00, by appointment.
See it in our showroomService
Our own service technicians across Slovenia and a spare-parts stock in Ljubljana. Installation, commissioning and training are arranged on request and listed separately in the quote.
More about serviceSend an enquiry
Or call Elvis: +386 41 636 207
Prefer to see the machine in person?
Machine page
All technical data, documents and photos
The full gallery, the description, the PDF quote and similar machines are on the regular machine page.
Open the machine pageBARTH workstations in stock — A press, a lift and tilt table and a vacuum table: all three machines in one place.