Vai al contenuto

Joinery press

BARTHMULTI Press RPGL 2530

Frames, carcasses and panels at one workstation.

Nuova · Anno 2024 · In pronta consegna a Lubiana

Computer rendering of the MULTI Press RPGL 2530 in a three-quarter view: the frame with the perforated plate, four hydraulic press units, a clamped carcass and a mitre joint held in clamps.Computer rendering

14.467,00 €+ IVA

Inviate una richiesta
Chiamate +386 41 636 207

A joinery press holds glued parts under even pressure until the glue sets — from a door frame to a whole carcass.

Computer rendering

The press, moved by your scrolling.

The film is a computer rendering, made from photographs of our unit and the maker’s video. It illustrates how the press works; the figures are in the chapters and the technical data.

Computer rendering

Up close

The machine in detail.

Computer renderings of selected units, made from photographs of our unit. They illustrate the construction; the figures are in the chapters and the technical data.

  • Computer rendering of the hydraulic press units and the carcass attachments around a clamped carcass.Computer rendering
    The hydraulic press units and the carcass attachments around a clamped carcass.
  • Computer rendering of a press unit's hand pump: lever, cylinder and piston.Computer rendering
    The manual hydraulics of a press unit: lever, cylinder and piston.
  • Computer rendering of a rack clamp on the perforated plate.Computer rendering
    A rack clamp on the perforated plate; a lever tightens it against the workpiece.
  • Computer rendering of a carcass attachment with a scale on the rack and a cap bearing the BARTH mark.Computer rendering
    A carcass attachment: the scale on the rack, the nut and the cap with the brand mark.
  • Computer rendering of a tilting clamp at a mitre joint.Computer rendering
    A tilting clamp for angled glue-ups also presses at an angle of up to ±30°.
  • Computer rendering of the MULTI Press RPGL 2530 from the front.Computer rendering
    Front view of the press: the hydraulic units, the carcass attachments and the perforated plate.

Clamping area

2,900 × 2,080 mm for large parts.

The frame section holds carcasses and frames up to about 2,900 × 2,080 mm, and the perforated plate beside it takes pressers and clamps. The machine occupies a footprint of 3,080 × 800 mm and stands 2,750 mm tall.

The BARTH MULTI Press RPGL 2530 from the side: the frame, the perforated plate and the press units
The press from the side.
Clamping area, front view
2.900 × 2.080 mm
Machine footprint
3.080 × 800 mm
Both shapes are drawn to the same scale.

Manual hydraulics

Up to 2,000 kg per cylinder.

Four vertical hydraulic press units have a manual two-stage pump. Each cylinder develops up to 2,000 kg of force over a stroke of 100 mm; according to the manufacturer, you operate the unit with one hand and the pump has overload protection.

Two hydraulic units with levers and a measuring rack on the press arms
Hydraulic units with levers.
Force per cylinder
2,000kg
Cylinder stroke
100mm

From a drawer to a carcass

From 6 to 60 cm of depth.

The carcass set is simply plugged onto the hydraulic units and turns them into a press for drawers and carcasses. The depth adjusts continuously, from a 6 cm drawer to a standard carcass depth of 60 cm.

Two blue carcass-set arms one above the other, with a measuring rack and the hydraulic units
The carcass set on two levels.
Smallest depth (a drawer)
6cm
Standard carcass depth
60cm

The 90° stop and the side press

Square from the moment it is clamped.

The carcass rests against a 90° stop and the side press unit presses it from the second direction, so it stays square while the glue sets. According to the manufacturer, one worker can handle the gluing and assembly.

An oak panel clamped between two hydraulic units at the top and a stop at the bottom
A panel between the hydraulic units and the stop.
Schematic: pressure from above and from the side towards the 90° stop.

The perforated plate

A presser exactly where you need it.

Pressers and clamps go into holes on a 70 mm grid. The rack presser is pushed up to the workpiece and tightened with a crank, so frames, panels and parts of irregular shape can be clamped.

A rack presser with a crank on the perforated plate, with a strap around the workpiece beside it
A rack presser on the plate.
Schematic: a 70 mm hole grid; pressers and clamps can go into any hole.

Angled and mitre gluing

A tilt of up to ±30°.

The tilting presser also presses at an angle of up to ±30°, so you can clamp angled and mitre joints.

A rounded workpiece with a strap on the perforated plate, with a mitre joint at the bottom right
A workpiece with a mitre joint on the plate.
0°
Move the slider: the presser tilts by up to ±30°.Schematic of the tilting presser.

A mobile press

A workstation you can move.

The press has wheels for moving it, so you can place it wherever you need it in the workshop that day.

A swivel caster with a plastic wheel on the bracket of the press frame
A wheel on the frame bracket.

Viewing and testing

In stock in our showroom.

The press is new, built in 2024, and stands in our showroom at Tacenska cesta 25. Viewing and testing with your own workpieces take place by arrangement.

Year of manufacture
2024
Condition
New

Fotografie

Da vicino.

Questa macchina nel nostro showroom a Lubiana.

  • The post with the BARTH MULTIPRESS lettering, a hydraulic unit and an oak panel in the frame section
    The frame section with a hydraulic unit
  • Two press arms one above the other, a wheel at the bottom of the frame
    Press arms on two levels
  • The perforated plate in sections beside the blue frame
    The perforated plate in sections
  • A hydraulic cylinder with a lever above a press arm
    A hydraulic cylinder with a lever

In breve

In numeri.

Tutti i numeri provengono dai dati di questa macchina.

Clamping area
2,900 × 2,080mm
Force per cylinder
2,000kg
Cylinder stroke
100mm
Vertical hydraulic press units
4
Tilt of the presser for angled gluing
±30°
Perforated plate grid
70mm
Weight of the machine
668kg
Dimensions of the machine
3,080 × 800 × 2,750mm

Specifiche

Tutti i dati tecnici.

Raggruppati per sezione. Cercate un dato o espandete una sezione.

Clamping area and use

3
Area di serraggio massima
circa 2900 × 2080 mm
Altezza regolabile degli elementi di pressione
Installato
Adatta per telai, carcasse, pannelli e strutture
Installato

Hydraulics and pressure

4
Forza di pressione per singolo cilindro
fino a 2000 kg
Impianto idraulico manuale con pompa a due stadi
Installato
Corsa del cilindro idraulico
100 mm
4 × unità di pressione idraulica verticale (BM-60-07)
Installato

Carcasses and edge gluing

2
2 × attacco SET per carcasse, sopra + sotto (BM-35-46)
Installato
2 × barra di pressione e allineamento per incollaggio in larghezza (BM-70-12)
Installato

Pressers, clamps and supports

6
2 × pressore inclinabile per incollaggi ad angolo ±30° (BM-35-55)
Installato
2 × pressore Barth con cremagliera e cinghia (BM-70-05)
Installato
Nastro Barth 3000 mm (BM-70-05-0300)
Installato
Pressore Barth con cremagliera (BM-70-33)
Installato
4 × Barth support — supporto a 360° (BM-70-34)
Installato
2 × morsetto verticale Barth, altezza di serraggio fino a 200 mm (BM-70-38)
Installato

Moving the press

1
Ruote per lo spostamento della pressa (BM-70-55)
Installato

Construction

2
Struttura robusta in profilati a parete spessa
Installato
Struttura modulare con possibilità di accessori opzionali
Installato

Dimensions and weight

2
Peso
668 kg
Dimensioni
3080×800×2750 mm

Machine

5
Produttore
BARTH
Modello
MULTI Press RPGL 2530
Anno di costruzione
2024
Condizioni
Nuova
Categoria
Presse — Presse per corpi di mobili

BARTH in stock

Three machines for one workshop.

The BARTH machines currently in stock in our showroom. The price applies to each machine separately.

  • The perforated plate with pressers, a strap and a rounded workpiece

    Nuova · Anno 2024

    MULTI Press RPGL 2530

    • Area di serraggio massima: circa 2900 × 2080 mm
    • Forza di pressione per singolo cilindro: fino a 2000 kg

    14.467,00 €+ IVA

    You are viewing this machinePagina della macchina

Acquisto

In pronta consegna a Lubiana.

Visita e prova su appuntamento.

BARTH MULTI Press RPGL 2530

Nuova · Anno 2024 · In pronta consegna a Lubiana

Prezzo

14.467,00 €+ IVA

Inviate una richiesta

Con l’acquisto della macchina

  • Consegna, installazione e formazione sono fatturate a parte
  • Disponibile subito a magazzino.
  • In pronta consegna da noi a Lubiana — visita e prova su appuntamento.

Showroom

We show you the machine in person; bring your own material. Tacenska cesta 25, Ljubljana-Šentvid, Mon–Fri 8:00–16:00, by appointment.

Visitate lo showroom

Assistenza

Tecnici propri in tutta la Slovenia e ricambi a magazzino a Lubiana. Installazione, messa in servizio e formazione le organizziamo previo accordo e le indichiamo separatamente nell’offerta.

Maggiori informazioni sull’assistenza

Inviate una richiesta

Oppure chiamate Elvis: +386 41 636 207

Preferite vedere la macchina dal vivo?

Pagina della macchina

Tutti i dati tecnici, i documenti e le fotografie

La galleria completa, la descrizione, l’offerta in PDF e le macchine simili si trovano nella normale pagina della macchina.

Aprite la pagina della macchina

BARTH workstations in stock — A press, a lift and tilt table and a vacuum table: all three machines in one place.