Preskočite na sadržaj
Totus

Contact (wide-belt) sander

Format4finish 1350 classic

Working width 1350 mm, sanding height from 3 to 170 mm.

Rabljen, testiran · Godište 2017 · Na zalihi u Ljubljani

The Format4 finish 1350 classic with its display and a table with a perforated belt

36.000,00 €+ PDV

Pošaljite upit

A contact (wide-belt) sander with a working width of 1350 mm and a segmented sanding pad.

Working width

1350 mm of working width.

The machine has a working width of 1350 mm.

Working width1.350mm

Mjerilo u milimetrima.

Sanding height

From 3 to 170 mm.

The sanding height is from 3 to 170 mm.

A view along the table into the machine: the perforated belt and two rollers above it
3–170 mmSanding heightRaspon je prikazan u mjerilu.

Sanding pad

A segmented sanding pad.

The machine has a segmented pad: the unit is marked “Segmented Pad”.

The unit marked “Segmented Pad”, with its handle and two cone-shaped parts
The unit marked “Segmented Pad”.

Controls

A control panel with a display.

The machine has a control panel with a display. Next to the display are an emergency stop and two buttons marked 0 and I.

The control panel with its display, emergency stop and buttons
The control panel with its display.

Connection

22.5 kW. 3×400 V. 50 Hz.

Connection according to the nameplate: 3×400 V, 50 Hz, 22.5 kW.

Power per the nameplate
22.5kW
Connection voltage
400V

Fotografije

Izbliza.

Ovaj stroj u našem izložbenom salonu u Ljubljani.

  • The Format4 finish 1350 classic marking on the machine housing
    The model marking on the housing
  • The inside of the machine with the doors open
    A look inside with the doors open
  • The belt between two rollers inside the machine
    The belt between two rollers
  • The upper roller and the belt inside the machine
    The upper roller and the belt
  • The belt inside the machine up close
    The belt up close
  • The unit marked “Segmented Pad” up close
    The unit marked “Segmented Pad” up close
  • The motor and pneumatic parts with the doors open
    The motor and pneumatic parts
  • A view along the table, with a steel roller on the left
    A view along the table

Ukratko

U brojkama.

Sve brojke potječu iz podataka ovog stroja.

Working width
1350mm
Sanding height
3–170mm
Power per the nameplate
22.5kW
Connection voltage
400V
Year of manufacture
2017

Specifikacije

Svi tehnički podaci.

Razvrstani po sklopovima. Pronađite podatak ili proširite sklop.

Capacity

2
Radna širina
1350 mm
Visina brušenja
3–170 mm

Sanding

1
Segmentni brusni jastučić (oznaka »SEGMENTED PAD« na jedinici)
Ugrađeno

Controls

1
Upravljačka ploča sa zaslonom
Ugrađeno

Table

1
Valjkasti produžetak stola na izlaznoj strani (dva valjka)
Ugrađeno

Electrical connection

2
Snaga
22,5 kW
Napon
3×400 V

Machine

5
Proizvođač
Format4
Model
finish 1350 classic
Godina proizvodnje
2017
Stanje
Rabljen, testiran
Kategorija
Brusilice — Širokotračne brusilice

Kupnja

Na zalihi u Ljubljani.

Razgled i proba po dogovoru.

Format4 finish 1350 classic

Rabljen, testiran · Godište 2017 · Na zalihi u Ljubljani

Cijena

36.000,00 €+ PDV

Pošaljite upit

Pri kupnji stroja

  • Svaki rabljeni stroj servisiran i ispitan
  • Dostava, montaža i obuka obračunavaju se posebno
  • Isporuka odmah sa zalihe.
  • Na zalihi kod nas u Ljubljani — razgled i proba po dogovoru.

Izložbeni salon

Stroj pokrećemo uživo s Vašim materijalom. Tacenska cesta 25, Ljubljana-Šentvid, pon.–pet. 8.00–16.00, po dogovoru.

Pogledajte ga u izložbenom salonu

Servis

Vlastiti serviseri diljem Slovenije i zaliha rezervnih dijelova u Ljubljani. Montažu, puštanje u rad i obuku organiziramo po dogovoru i u ponudi ih navodimo zasebno.

Više o servisu

Pošaljite upit

Ili nazovite Elvisa: +386 41 636 207

Radije biste stroj vidjeli uživo?

Stranica stroja

Svi tehnički podaci, dokumenti i fotografije

Cjelokupna galerija, opis, ponuda u PDF-u i slični strojevi nalaze se na uobičajenoj stranici stroja.

Otvorite stranicu stroja