
Nov · Godište 2024
MULTI Press RPGL 2530
- Maksimalno stezno područje: približno 2900 × 2080 mm
- Pritisna sila pojedinog cilindra: do 2000 kg
14.467,00 €+ PDV

Joinery press
Frames, carcasses and panels at one workstation.
Nov · Godište 2024 · Na zalihi u Ljubljani

A joinery press holds glued parts under even pressure until the glue sets — from a door frame to a whole carcass.
Computer rendering
The film is a computer rendering, made from photographs of our unit and the maker’s video. It illustrates how the press works; the figures are in the chapters and the technical data.


Up close
Computer renderings of selected units, made from photographs of our unit. They illustrate the construction; the figures are in the chapters and the technical data.






Clamping area
The frame section holds carcasses and frames up to about 2,900 × 2,080 mm, and the perforated plate beside it takes pressers and clamps. The machine occupies a footprint of 3,080 × 800 mm and stands 2,750 mm tall.

Manual hydraulics
Four vertical hydraulic press units have a manual two-stage pump. Each cylinder develops up to 2,000 kg of force over a stroke of 100 mm; according to the manufacturer, you operate the unit with one hand and the pump has overload protection.

From a drawer to a carcass
The carcass set is simply plugged onto the hydraulic units and turns them into a press for drawers and carcasses. The depth adjusts continuously, from a 6 cm drawer to a standard carcass depth of 60 cm.

The 90° stop and the side press
The carcass rests against a 90° stop and the side press unit presses it from the second direction, so it stays square while the glue sets. According to the manufacturer, one worker can handle the gluing and assembly.

The perforated plate
Pressers and clamps go into holes on a 70 mm grid. The rack presser is pushed up to the workpiece and tightened with a crank, so frames, panels and parts of irregular shape can be clamped.

Angled and mitre gluing
The tilting presser also presses at an angle of up to ±30°, so you can clamp angled and mitre joints.

A mobile press
The press has wheels for moving it, so you can place it wherever you need it in the workshop that day.

Viewing and testing
The press is new, built in 2024, and stands in our showroom at Tacenska cesta 25. Viewing and testing with your own workpieces take place by arrangement.
Fotografije
Ovaj stroj u našem izložbenom salonu u Ljubljani.




Ukratko
Sve brojke potječu iz podataka ovog stroja.
Specifikacije
Razvrstani po sklopovima. Pronađite podatak ili proširite sklop.
BARTH in stock
The BARTH machines currently in stock in our showroom. The price applies to each machine separately.

Nov · Godište 2024
14.467,00 €+ PDV

Nov · Godište 2024
5.712,00 €+ PDV
Kupnja
Razgled i proba po dogovoru.

BARTH MULTI Press RPGL 2530
Nov · Godište 2024 · Na zalihi u Ljubljani
Cijena
14.467,00 €+ PDV
Pošaljite upitPon–pet 8.00–16.00
We show you the machine in person; bring your own material. Tacenska cesta 25, Ljubljana-Šentvid, Mon–Fri 8:00–16:00, by appointment.
Pogledajte ga u izložbenom salonuVlastiti serviseri diljem Slovenije i zaliha rezervnih dijelova u Ljubljani. Montažu, puštanje u rad i obuku organiziramo po dogovoru i u ponudi ih navodimo zasebno.
Više o servisuIli nazovite Elvisa: +386 41 636 207
Radije biste stroj vidjeli uživo?
Stranica stroja
Cjelokupna galerija, opis, ponuda u PDF-u i slični strojevi nalaze se na uobičajenoj stranici stroja.
Otvorite stranicu strojaBARTH workstations in stock — A press, a lift and tilt table and a vacuum table: all three machines in one place.
Nužni kolačići brinu o radu stranice. Uz Vašu privolu mjerimo posjećenost i uspješnost oglašavanja (Google Ads, Meta). Bez privole Googleu šaljemo samo zahtjeve bez kolačića o pregledu stranice i poslanom upitu, bez Vašeg imena i e-adrese. Podatke ne prodajemo. Pravila privatnosti