All machines
Unitek
Sanding machines · Contact sanders
Unitek Winner
Contact sander
Overview – Unitek Winner
There is no overview for this machine yet. Technical data and optional equipment are available in the other tabs.
Technical data – Unitek Winner
- Diagram
- —
- Maximum working width
- 1100 mm
- Working height
minimalna
3 mm
maksimalna
160 mm
- Number of sanding belts
- 2
- Length of sanding belts
- 2150 mm
- Hardness of first roller
- 90SH
- Diameter of first roller
- 150 mm
- Diameter of second roller
- 150 mm
- Hard pad
- Width 50 mm
- Speed of sanding belts
- 18 meters per second
- Hardness of second roller
- 50SH
- Feed speed
- 4-20 meters per minute via converter
- Power of feed motor
- 0.75HP
- Power of working table lift motor
- 0.33HP
- Diameter of dust extraction ports
- 2 drops of 160 mm
- Working pressure
- 6 bar
- Front and rear roller track with two rollers
- —
- Power of main motor
- 15 HP (11kW)
- Automatic star/delta starter
- (limits maximum current at startup)
- Centering and oscillation of sanding belt with patented ECO GEAR system
- Backlash-free innovative oscillating system requires no compressed air and maintenance.
- Self-braking motor for rapid abrasive paper stop
- —
- Automatic positioning of working table according to workpiece thickness with outfeed adjustment
- —
- All pressure rollers are rubber-coated
- —
- Electronic digital display of set working height
- —
- Infeed and outfeed table with two rubber-coated rollers
- —
- Micrometric manual adjustment of working table position
- —
- Mechanical variator for infinitely variable adjustment of feed belt speed
- —
- Wedge for easy unit locking and paper replacement
- —
- System for easy tensioning of abrasive paper on units and pressure regulation
- —
- Emphasis on details - mesh guards, clear layout of pneumatic components
- —
Optional equipment – Unitek Winner
Other
120KM (15kW)
2
3a
3bRequired when using touchscreen control panel
42 pieces
5Motor power 1.5 HP (1.1 kW)
6Motor power 1.5 HP (1.1 kW)
7On request, motor can be increased to 5.5 HP (4 kW)
8(3 HP)
9(Protects the machine from damage)
10Display on the front of the machine with LED lights, already included in the price - Touch Screen control panel
Reports the following errors:
- thermal protection activated
- safety switch pressed
- front bar for limiting workpiece thickness is activated- 11is already included in case of ordering pneumatic pad with time control
12includes additional semi-hard pad
13N20 = 20 segments, 55 mm
15N40 = 40 segments, 27.5 mm
16
17
18System for rapid positioning adjustment of the sanding roller relative to the abrasive paper thickness, 6 positions, pneumatic engagement (for 2 rollers)
19(Front + rear)
20(for one table)
21
22(PLC controller)
Enables the following functions:
- storage of working programs
- adjustment of feed belt speed
- adjustment of sanding belt speeds (if frequency converter is on the motor)
- motor on/off - roller disengagement
- blower timer
- segmented buffer adjustment
- Slovenian translation of all menus and messages
23
24(first roller soft 50SH, second roller steel for calibration)
29Total of 2 motors
30(not available for roller in combined unit assembly), kit for 1 roller