1 / 26 photos

Edgebanders · Straight-edge edgebanders

Format4 Tempora F800

All units are computer-adjustable. The machine is designed for intensive use.

Do you need multiple operators working on the machine?

Do you require a machine for intensive production?

Do you want to bond thicker solid edge banding (up to 12mm)?

... then TEMPORA 60.12-e is the right choice for you.

User-friendly controls ensure 100% repeatability of settings.

Changing unit settings via programme takes only seconds.

Powerful units and optimised construction guarantee maximum machine stability.

Proper adjustment of finishing units means workpieces require no manual cleaning.

Dimensions: Length: 5290 mm Width: 1170 mm Height: 1650 mm Feed length: 3940 mm
Dimenzije obdelovanca: Debelina: 8-60 mm Minimalna širina: 70 mm Minimalna dolžina: 140 mm Debelina nalimkov v navitku: 0,4-3 mm Debelina paličnih nalimkov: 0,4-12 mm
Machine weight: 2700 kg
Smart touch control e-motion: 18" touchscreen for quick adjustment and unit control. Software for maintenance, network connection, temperature setting and meter counter. Motorized positioning to 0.01 mm.
Retractable working support: Support can be extended up to 600 mm and locked in any position within this range, allowing flexible adaptation when processing large workpieces.
Pressure bar height adjustment: Height is adjusted via the e-motion control system. Rubber-coated pressure rollers with bearings ensure gentle contact pressure, and preload maintains the workpiece in the same position throughout the entire working process.
Pre-milling unit: Two motors with 1.5 kW power, each at 12,000 rpm for optimal milling results. Diamond cutters for clean edges with a diameter of 100 mm and height of 49 mm.
Glue container: Coated with PTFE coating for easy cleaning. Has short heating time (8 min). Glue pot with capacity of 1.5 kg. A capacity of 1 kg is sufficient for approximately 250 running meters of processing on board thickness of 19 mm.
Feed chain: Enables continuous feed of the workpiece and prevents marks on the workpiece surface. Rubber-coated pads hold the workpiece and guide it straight without tilting. Feed speed: 12 m/min
Edge material feeder and pneumatic shears: Synchronous mechanical feed ensures optimal material feed. Processing of roll edge banding and stick edge banding in one pass. With integrated pneumatic shears for pre-cutting up to 3 mm thickness.
Clamping unit with saws: The edge trimming unit precisely cuts the overhang of edge banding on the front and rear edge of the board, ensuring perfect joint between edge and base material. Two motors with 0.5 kW power. 12,000 rpm for precise and clean edge cut. Tilt 0–15°.
Pressure unit with rollers: Pressure unit with three pressure rollers. First made of aluminium for adhesive cooling and last two conical for evenly distributed pressure. Drive ensures synchronized feed of workpiece and edge banding.
Multifunctional unit for edge trimming: Two motors with power 0.75 kW, each at speed 12,000 rpm, and four profile cutters for demanding materials. User can choose between straight, rounded (2 mm) and angled cut.
Rondomat with single motor: Single motor design at speed 12,000 rpm for clean processing of straight edges and soft and post forming profiles. Diamond 4-flute cutter for fast, precise and stable processing.
Radial scraping unit: Unit enables fine radius adjustment. Fine adjustment allows setting in increments up to 0.01 mm. Unit offers two independent units with scraper knives for radius 2 mm.
Brush unit: Purpose of the brush unit is cleaning the upper and lower edge for clean and glossy edge radius. Super-finish for ABS and PVC edge banding material. Two independent working units.

Enote

77Cools components in the electrical cabinet and provides additional air filtration to prevent dust particles from entering the electrical cabinet.
80Communicates with the machine via Bluetooth connection. Must not be combined with optional equipment no. 80A!Not compatible with: Edge thickness and workpiece thickness measurement
80ACommunicates with the machine via Bluetooth connection. Must not be combined with accessory no. 80!Not compatible with: Edge thickness measurement with Bluetooth portable device
76
72With the software, you can assign all machine operations to users. This accessory enables logging of operating hours, heating/standby and running metres/pieces for each individual user.
no image72A
no image72BRequires: Edge magazine "storedge duo" for 2 coiled edge materials · Not compatible with: Dynamic program adjustment for pressure bars
no image23
59Provides precise, controlled lubrication of the feed chain. Lubricant is automatically metered at preset time intervals, ensuring continuous supply and trouble-free operation.Not compatible with: Chain drive with feed speed 12 and 20 m/min and rubber coatings for optimal workpiece grip
60
64Mechanical limit at the machine inlet. Ensures correct spacing between workpieces during processing. Standard solution is a signal light.
46Enables easier insertion of longer workpieces into the machine.
48Mounted at the inlet guide and with a powerful fan creates a continuous air cushion between the table and workpiece, ensuring smooth movement without scratches. Robust surface 1050 × 400 mm. Requires accessory 46!Requires: Extended inlet (+ 400 mm)
49Suitable for easier movement of workpieces. Robust surface 2000×400 mm.Requires: Air cushion with fan as workpiece support, Extended inlet (+ 400 mm)
89Enables better feed of narrow elements 140 to 800 mm in length.Requires: Air cushion with fan as workpiece support
44
45Height 64 mm instead of 49 mm.Not compatible with: Reduced price for Tempora 60.12 without pre-scoring unit
47Height 64 mm instead of 49 mm and knives are replaceable.Not compatible with: Reduced price for Tempora 60.12 without pre-scoring unit, Pre-scoring, 64 mm instead of 49 mm, 2 motors of 2.2 kW instead of 1.5 kW each
43Used to preheat board edges and thereby ensures higher adhesive bond strength.
no image54B
65Not compatible with: 66
66DThe pre-melting unit enables continuous and uniform adhesive supply and maintains high application quality. The container holds up to 3.5 kg of EVA or PO granulate, while the adhesive pot holds 0.5 kg of liquid adhesive. A level sensor automatically triggers replenishment, and the heated adhesive roller ensures precise application.Not compatible with: Preparation for subsequent installation of pre-melter
50BAdditional replaceable adhesive pot with motorized adhesive quantity regulation and reverse rotation function, designed for machines without pre-melting unit.Requires: 50D · Not compatible with: 50
50CAdditional replaceable adhesive container with motorised adhesive quantity adjustment and reverse rotation function, intended for machines with pre-melting unitRequires: Pre-melter for granulate
51The tandem copying unit is a device that enables edge banding on panels with pre-drilled holes.Requires: Pneumatic-mechanical inlet fence to prevent premature workpiece feed
68Edge rounding unit for front and rear with dual motors, also for soft and post-formed panels. Enables edge processing from 0.4 to 3 mm thickness and height 10 to 60 mm. Motorised unit positioning.
no image78Requires: Corner rounding unit with 2 independent motors for soft and shaped workpieces and for processing front and rear edges with edge thickness 0.4–3.0 mm and processing height 10–60 mm; motorised drive for positioning the corner rounding unit
71Fine adjustments of the rounding unit position are carried out via motor with precision of 0.01 mm.
56advantEdge enables invisible joints especially for high-gloss materials up to height 40 mm. Since no time-consuming adhesive colour changes are required, setup times are significantly reduced.
58Ideal for processing larger quantities of PUR adhesive (2 kg) over an extended period.
90Requires: u-motion classic package

Enote za končno obdelavo

21MThe adhesive removal unit ensures flawless final surface finishing of the workpiece, as it removes adhesive residue at the glue line with a pulling cut. Two pneumatically controlled units with motorised adjustment and fine adjustment to 1/100 mm directly via the control panel ensure high precision and long service life.Requires: Multi-purpose trimming unit with vertical reference rollers for processing workpieces with hinge holes
30For smooth and structured surfaces; includes additional spray device instead of standard brush unit. Equipped with two motors each 1,400 rpm and polishing discs Ø 120 mm.Requires: Spray unit for cleaning liquids before polishing units
32Positioned in front of the brushes and assists in edge polishing.
42Positioned at the machine inlet, before the pre-scrapers. Prevents adhesive from gripping the workpiece surface, making it easier to remove in the subsequent cleaning stages.Not compatible with: Reduced price for Tempora 60.12 without pre-scoring unit
52Positioned near the sanding unit. Removes static electricity from panel surfaces.
53Increases the slip of individual unit followers and reduces the risk of surface damage.
74Enables horizontal and vertical production of grooves / profiles. Motorised adjustment along x and y axes. Limitation on the edge rounding unit from 10 to 45 mm thickness.Requires: 69 · Not compatible with: Corner rounding unit with 2 independent motors for soft and shaped workpieces and for processing front and rear edges with edge thickness 0.4–3.0 mm and processing height 10–60 mm; motorised drive for positioning the corner rounding unit

Prilagojene možnosti opreme

Pomembni dodatki

200-105Adjustable height from 870–960 mm. Length 2100 mm.
202-122Enables storage of multiple types of edge banding in a small space in front of the machine while simultaneously replacing the machine's support plate. Can be easily positioned next to the machine as needed.
202-123Enables space-saving storage of edge material.
202-129The puReady system keeps your PUR adhesive fresh and ready for use by storing it in nitrogen. This provides greater flexibility in edge banding and facilitates cleaning of adhesive pots.
202-141Additional adhesive pot with motorised adhesive quantity control and reverse rotation function, for machines with pre-melting unit.
202-141Additional adhesive pot with motorised adhesive quantity control and reverse rotation function, for machines without pre-melting unit.
500
502
501

Sistem vračanja

603Workpiece length from 300 to 2,800 mm, width from 80 to 1,300 mm, thickness from 8 to 60 mm. Workpieces with edgebanding on all four edges: Minimum dimensions 300 x 300 mm Maximum dimensions 1,300 x 1,300 mm Maximum weight at length < 700 mm is 30 kg Maximum weight at length > 700 mm is 60 kg Adjustable feed speed 7 to 20 m per minute Maximum speed 11 cycles per minute Transport belt for return movement of workpieces. Discharge table dimension 2,000 x 800 mm
620
621
605Workpiece length from 300 to 2,800 mm, width from 80 to 1,500 mm, thickness from 8 to 60 mm. Workpieces with edgebanding on all four edges: Minimum dimensions 300 x 80 mm Maximum dimensions 2,800 x 1,500 mm Maximum weight at length < 700 mm is 30 kg Maximum weight at length > 700 mm is 60 kg Adjustable feed speed 7 to 20 m per minute Maximum speed 11 cycles per minute Transport belt for return movement of workpieces. Discharge table dimension 2,000 x 800 mm
621A
84Not compatible with: u-motion professional package
85Not compatible with: u-motion classic package

Other

50Pot features PTFE coating for easier cleaning and heating of the application roller.
202-114Pot features roller rotation, PTFE coating for easier cleaning and heating of the application roller.
202-115Pot features inverted roller rotation, PTFE coating for easier cleaning and heating of the application roller.
200-107Contains agents for moisture extraction from air.
202-139Reduces adhesive pot volume.