Edgebanders · Straight-edge edgebanders
Format4 Tempora F400
Compact, space-saving and affordable machine for edge banding up to 3 mm.
Overview – Format4 Tempora F400
Format4 tempora F400 45.03 is a professional edgebander for fast, precise and efficient edge processing. It offers flexible unit selection, simple operation and compatibility with EVA and PUR adhesives, making it ideal for small to medium-sized furniture manufacturers.
A robust base, solid processing units and precise dust extraction ensure reliable operation even under demanding use. M-motion and X-motion Plus controls enable high repeatability of settings, creation of individual programmes and shorter changeover times when switching materials and operations.
Key specifications:
- Machine length: 3600 mm
- Edge banding thickness: 0.4–3 mm
- Workpiece thickness: 8–45 mm
- 10.4-inch Smartouch display
- Three free positions for finishing units
- Glue unit for EVA and PUR adhesives with easy-clean system
Technical data – Format4 Tempora F400
- Dimensions
- Length: 3600 mm Width: 1000 mm Height: 1400 mm Feed length: 2360 mm
- Thickness of veneers in roll
- Minimum: 0.4 mm Maximum: 3 mm
- Dimenzije obdelovanca
- Debelina: 8-45 mm Minimalna širina: 70 mm Minimalna dolžina: 140 mm Debelina nalimkov v navitku: 0,4-3 mm
- Workpiece thickness
- Minimum: 8 mm Maximum: 45 mm
- Minimum workpiece length
- —
- Minimum workpiece width
- —
- Machine weight
- 1050 kg
- Smart touch control
- 10.4" touchscreen for quick unit adjustment and control. Software for maintenance, network connection, temperature setting and meter counter. Motorized positioning to 0.01 mm.
- Feed chain
- Enables continuous workpiece feed and prevents marks on workpiece surface. Rubberized pads hold workpiece and guide it straight without tilting. Feed speed: 9 m/min
- Retractable working support
- Support can be extended up to 450 mm and locked in any position within this range, enabling flexible adjustment when processing large pieces.
- Pressure bar height adjustment
- Height is adjusted manually via lever. Rubberized pressure rollers with bearings provide gentle contact pressure, preload maintains workpiece in same position throughout entire working process.
- Pre-milling unit
- Two motors rated 0.75 kW, each at 12,000 rpm for best milling results. Diamond cutters for clean edges with bit diameter 80 mm and height 49 mm.
- Glue container
- Coated with PTFE coating for easy cleaning. Features short heating time (10 min). Adhesive container with capacity 1.5 kg. Capacity 1 kg is sufficient for approximately 250 running meters of processing on board thickness 19 mm.
- Edge material feeder and pneumatic shears
- Synchronous mechanical feed ensures optimal material feed. Processing of roll edge banding and stick edge banding in one pass. With integrated pneumatic shears for pre-cutting up to 3 mm thickness.
- Pressure unit
- Pressure unit with three pressure rollers. First made of aluminium for adhesive cooling and last conical for evenly distributed pressure. Drive ensures synchronized feed of workpiece and edge banding.
- Clamping unit with saws - linear feed
- Edge trimming unit precisely cuts excess edge banding on the front and rear edge of the board, ensuring perfect joint between edge and base material. Two motors with power 0.35 kW. 12,000 rpm for precise and clean edge trim.
- Multifunctional unit for edge trimming
- Two motors with power 0.55 kW, each at speed 12,000 rpm, and four profile cutters for demanding materials. User can choose between straight, rounded (2 mm) and angled cut.
- Radial scraping unit
- Unit enables fine radius adjustment. Fine adjustment allows setting in increments up to 0.01 mm. Unit offers two independent units with scraper knives for radius 2 mm.
- Brush unit
- Purpose of the brush unit is cleaning the upper and lower edge for clean and glossy edge radius. Super-finish for ABS and PVC edge banding material. Two independent working units.
Optional equipment – Format4 Tempora F400
Enote
77Cools components in the electrical cabinet and provides additional air filtration to prevent dust particles from entering the electrical cabinet.
80Communicates with the machine via Bluetooth connection.
76
72With the software, you can assign all machine operations to users. This accessory enables logging of operating hours, heating/standby and running metres/pieces for each individual user.
64Mechanical limit at the machine inlet.
Ensures correct spacing between workpieces during processing. Standard solution is a signal light.
46Enables easier insertion of longer workpieces into the machine.
44
47Height 49 mm and blades are replaceable.Not compatible with: Machine without pre-scoring heads
43Used to preheat board edges and thereby ensures higher adhesive bond strength.
66Tool-free quick-change system for adhesive container enables exceptionally short cleaning and changeover times when switching adhesive or paint. Synchronized and finely adjustable adhesive roller ensures precise adhesive application.
Replaceable adhesive container is also ideal for PUR adhesive application.
50Pot features PTFE coating for easier cleaning and heating of the application roller.Requires: Interchangeable adhesive container
63Facilitates cleaning of the adhesive pot.Not compatible with: Adhesive pot with PTFE coating
50DPTFE-coated, top-mounted adhesive pot with motorized adhesive quantity regulation, forward and reverse operation, and tool-free quick-change system. Replaces bottom-mounted adhesive pot. Consumption is approximately 250 running metres per 1 kg of granulate for 19 mm thick board.Requires: Interchangeable adhesive container
50BAdditional replaceable adhesive pot with motorized adhesive quantity regulation and reverse rotation function, designed for machines without pre-melting unit.Requires: Adhesive pot with PTFE coating · Not compatible with: Additional adhesive pot with PTFE coating for 1.5 kg capacity
48With one motor 0.35 kW and 12,000 rpm.
49With one motor 0.35 kW and 12,000 rpm.
51Tandem tracer is a unit that enables edge gluing to boards with pre-drilled holes.
Requires additional item 64!Requires: Pneumatic mechanical lock at the feed belt inlet
Enote za končno obdelavo
20Unit is pneumatically controlled. Removes adhesive residue on upper and lower edge.
30For smooth and structured surfaces; includes additional spray device instead of standard brush unit. Equipped with two motors each 1,400 rpm and polishing discs Ø 120 mm.Requires: Cleaning agent application unit
32Positioned in front of the brushes and assists in edge polishing.
42Positioned at the machine inlet, before the pre-scrapers. Prevents adhesive from gripping the workpiece surface, making it easier to remove in the subsequent cleaning stages.Not compatible with: Machine without pre-scoring heads
53Increases the slip of individual unit followers and reduces the risk of surface damage.
Prilagojene možnosti opreme
81Instead of 2 mm, tools are replaced with 1 mm radius.
83Instead of 2 mm, tools are replaced with 3 mm radius.
No surcharge!
33
Paketi
7515" LCD touchscreen instead of 10.4"
Includes machine maintenance software and internet connectivity option.
Saw clamping unit with two separate motors, pneumatic tilt.
Multi-function spindle unit with two motors of 0.75 kW each and 12000 rpm, motorised unit adjustment via controller.
Radius scraper unit with pneumatic engagement and motorised adjustment with two servo motors.
Other
200-106Mobile cleaning unit for adhesive pot with integrated preheating function enables quick adhesive changeover and maximum cleaning convenience. Also includes adhesive roller drive for adhesive circulation or roller cleaning.
»Mobile adhesive pot cleaning unit«»Mobilna naprava za čiščenje lepilnih posod«
200-107Contains agents for moisture extraction from air.
202-122Enables storage of multiple types of edge banding in a small space in front of the machine while simultaneously replacing the machine's support plate. Can be easily positioned next to the machine as needed.
202-123Enables space-saving storage of edge material.
220-128Reduces adhesive pot volume.
220-100Pot features PTFE coating for easier cleaning and heating of the application roller.
220-132Adhesive pot with motorized adhesive quantity regulation and reverse rotation function, designed for machines without pre-melting unit. Adhesive pot features PTFE coating and 0.6 kg capacity, suitable for EVA, PO and PUR hot melt adhesives. Precisely adjustable structured adhesive roller ensures uniform and precise adhesive application.
