CNC machining centres · CNC with console table
Format4 Profit H350R
Creativity without limits
Overview – Format4 Profit H350R
Creativity without limits
You will be convinced by 5-axis technology that supports unlimited creativity.
Documents
Technical data – Format4 Profit H350R
- Dimensions
- —
- Construction & weight
- Monolithic steel frame 4.100 kg
- Working dimensions
- x-axis 2.977 mm y-axis 1.555 mm z-axis 150 mm
- Working axis travels
x-os
4.010 mm
y-os
1970 mm
z-os
455 mm
- Axis feed system
x-os
po zobati letvi
y-os
vijačno vreteno
z-os
vijačno vreteno
- Feed speeds
- x-axis 70 m/min (with Bumpers the limit is 25 m/min) y-axis 70 m/min z-axis 23 m/min
- Required compressed air pressure
na vhodu
8 barov
minimalni delovni
6 barov
- Milling unit
- Motor power 12 kW (maximum power at 12,000 rpm) 1,000 - 24,000 rpm (Controlled via frequency converter) Liquid cooling of motor via cooler. Ceramic bearings. Pneumatic tool clamping HSK-F63 type via tool storage Pneumatically controlled dust extraction hood at two positions Maximum tool weight 7.5 kg. Additional clamps for fixing additional units to the motor.
- Boring unit
- Boring unit with integrated saw in x-axis model DH-18 6H 1S. 18 boring units (12 vertical boring heads, 6 horizontal boring heads) Shank clamping with diameter shank 10 mm. Maximum stroke 70 mm Maximum drill length 70 mm Boring unit covers entire working area with all units.
- Saw unit
- Fixed unit in x-axis direction + fixed unit in y-axis direction Blade diameter 120 mm Maximum blade width 5 mm 6000 rpm
- Linear tool storage on left side of table
- 12 positions maximum tool diameter 250 mm maximum tool length 240 mm ONE POSITION FOR ANGLE UNIT
- Working table
- x axis 3000 mm y axis 1500 mm Movable aluminium supports for vacuum grippers. 6 supports with length 1500 mm
- Vacuum grippers
- TL type grippers (Schmalz) height 100 mm with dual vacuum channel: 8 pieces with dimension 140 x 115 mm (H=100mm) 4 pieces with dimension 125 x 75 mm (H=100mm)
- Gripper positioning
- Positioning using laser device mounted on movable bracket and guided by controller. Manual positioning of grippers on table.
- Working areas
- 1 working area Package includes 1 footswitch for confirming workpiece positioning on each working area.
- Foot pedal
- For confirmation of workpiece positioning on each working area.
- Lifting bars
- used for easier loading and unloading of workpieces 4 pieces Maximum weight per individual rail is 20 kg.
- Connections for counter-templates
- 1 connection for working with counter-templates on the left side of the table.
- Two types of workpiece supports
- 4 front 4 rear 2+2 side
- Vacuum pump
- One piece Air flow 90 m3/h
- Guide lubrication
- Automatic centralized
- Dust extraction system
- Centralized with single outlet for easy connection to workshop dust extraction system. Dust port: 300 mm Capture height adjusts automatically according to program. Required air flow for dust extraction: 5100 m³/h (20 m/s, 1000 Pa)
- Protection
- Protection with line photocells. Guard from three sides with door. EMERGENCY STOP buttons on front of machine, on portable keypad and on control unit.
- Machine control
- Controller is implemented via personal computer. Standard is computer on fixed bracket. (Option: mobile bracket) Machine part of controller consists of following components: HARD DISK, 24" VIDEO LCD MONITOR, DVD-RW, operating system WINDOWS 7, LAN NETWORK CARD, 2 x USB, connection at monitor, paper holder.
- Remote control
- Enables spindle speed adjustment via potentiometer and gripper positioning via movable laser.
- F4 integrate control program
- The program enables preparation of work programs and their execution, machine control, setting of available tools and adjustment of all machine parameters. The advantage of the program is the integration of all functions within the same window. All programs are supported with 3D displays for easier visualization. The program is also compatible with external applications such as AutoCAD and other graphics programs.
- Additional programs (H350)
- WOOD FLASH program for machine control in Slovenian language. 2 licenses, one for computer on machine and one for additional workstation WSC program for gripper positioning and work program execution 2D simulator Tools manager for setting all tools and program for tool positioning on machine. Graphical editor for preparation of work programs. GENERAL MACROS / SUBROUTINES for easy execution of various types of machining (from milling arbitrary shapes to cabinet side machining); Parametric program for manufacturing INTERIOR DOORS with included functions for rough and fine formatting (router or saw), grooving and bottom machining, creation of grooves for locks, handles and cylinders, all types of hinges, openings for ventilation, hooks and various types of closures. Special programs are prepared for left and right doors. Program for creation of inscriptions and pockets/cleaning of arbitrary contours. Use of 300 parameters per program for creation of smart custom solutions. Unlimited DXF format import from other programs. Graphical 3D display of all programs. Other characteristics of program editor: - CAD commands (rotation, movement, repetitions, contour drawing in polyline or spline form, drawing assistance) - Text milling (all TrueType fonts from computer) - Emptying of arbitrary contours with arbitrary tools (strategy selection) - Enlargement and reduction of contours - Setting logical conditions in program - Use of up to 300 parameters/variables (+ additional parameters via subroutine import) - Interpolation of milling paths (curve smoothing) - Addition of virtual/phantom planes at arbitrary position, which simplify use of angle units (fourth and fifth axes) - Use of subroutines (nesting of machining) - Setting of machining optimization (sequence for shorter machining time) and linking multiple programs on table with tool change optimization
- Remote service
- TELESERVICE package via Internet: Enables connection between machine computer and service center, allowing direct and rapid intervention on machine parameters, individual work programs and installation of any newer software versions. Internet line connection to machine computer is required.
- Accessories included in price
- Machine operating and maintenance instructions in Slovenian language. Electrical and pneumatic diagrams. Spare parts manual. Complete set of keys. Manual lubrication pump.
- Tools included in price
- HSK-F63 clamping head (1 pc. - right) Collet for clamping heads with diameter of choice (1 pc.) 10 drills of choice (diameters 5, 8, 35mm) Rod diamond router for formatting (1 pc., diameter 18mm, H=43mm)
- Linearni prislon
Na levi in desni strani mize.
Omogoča lažjo pozicioniranje obdelovancev na mizi ne glede na obliko.
Optional equipment – Format4 Profit H350R
Software and Electronic Options
- no image002
- no imageC07
- no imageC10
Vacuum Pods
- no image480Requires: C135 · Not compatible with: Compressed air installation for clamps on 6 consoles, C50, Compressed air and vacuum activation on 6 consoles, C52, C55
- no imageC483Not compatible with: 4 stronger lifting bars instead of standard 4, 6 heavy-duty lifting bars, C150
- no imageC484
- no image65Not compatible with: More powerful vacuum pump, More powerful vacuum pump
- no image60Requires: More powerful vacuum pump
- no image62Requires: More powerful vacuum pump
Software
- no imageC490
- no imageC492Requires: EL-F4D-01 - E-Learning F4Design (GER / ENG / FRE / POL / RUS / SPA / CZE), EL-F4D-01 - E-Learning F4DesignPlatinum (GER / ENG / FRE / POL / RUS / SPA / CZE), 23-3-078 - F4 Design maintenance for 1 year, 23-3-080 - F4 Design Platinum maintenance for 1 year · Not compatible with: 300-05-310 - F4design (including 3-axis power feeder)
- no imageC495Requires: 300-05-312 - F4design-PLATINUM (without power feeder), C497
- no imageC496Requires: 300-05-312 - F4design-PLATINUM (without power feeder), C497
Transport
- no imageC228
E-Learning
- no image800
- no image802
- no image806
- no image880
- no image882
- no image883
- no image884
Other
C06For use of more demanding graphics programs on the machine computer.
C08Cools components in the electrical cabinet and provides additional air filtration to prevent dust particles from entering the electrical cabinet.
C12Maintains computer operation and automatically shuts it down in the event of a power failure.
C15Protect electrical cables and compressed air pipes from chips.
C71
C13Not compatible with: Machine pre-preparation for automatic chip removal.
C194The purpose of this option is pre-preparation for possible future machine upgrade.Not compatible with: Automatic chip removal mat
C14With user application
C16Prevents dust and fixed particles from entering the bearing blocks of the linear guides.
Very important addition when machining abrasive materials.
C17Used for positioning elements for semi-circular windows.Requires: Compressed air and vacuum activation
on 6 consoles, C52, C55
C19
C20
C41Includes alternating mode of operation.
Limitation of maximum speed of rapid movements in X direction to 25 m/min.Not compatible with: Safety system
with bumpers and photocell protection on the front of the machine
C42Also includes alternating mode of operation.Requires: Mobile control
console · Not compatible with: Safety system
with bumpers and photocell protection on the front of the machine, Safety system
with bumpers
C43In case of selecting photocells for protection.
The machine works on one side, while loading is possible on the other side.Not compatible with: Safety system
with bumpers and photocell protection on the front of the machine, Safety system
with bumpers, Safety system with safety mats
C40Includes alternating mode of operation.
2 work areas with 2 foot pedals
1 safety fence on left side of machineNot compatible with: Additional control panel on the other side of the machine
C28Instead of left side.Not compatible with: Mobile control
console, Safety system with safety mats
C29Includes:
extended cables for positioning the control at the optimal position in front of the machine
adapted safety system
wheeled baseNot compatible with: Fixed control console on right side of machine (for model H350 16.30 only), Safety system
with bumpers and photocell protection on the front of the machine
C480Applies to VACUUM only:
Operation with a single toggle switch only.
Note:
Not compatible with options: C49 or C50 or C51 or C52 or C55
C98Possible machine states:
Red = machine error has occurred
Flashing white = machine is in reset phase
White = machine is reset and under power
Flashing green = waiting for start with two buttons
Green = program is running
C99Has lighting function only.Requires: Optical display of machine
status on the control cabinet
C53Instead of pedalsRequires: Safety system
with bumpers and photocell protection on the front of the machine, Safety system
with bumpers, Safety system with safety mats, Alternating mode of operation
C11Enables confirmation of start of machining on the right side of the table (in alternating mode of operation)
C90For displaying machining on the work table
Very useful for staircase processingRequires: C420, 420
C110To reduce power consumption during idle phases or when the machine is not operating.
After program completion:
Vacuum pumps are switched off
Monitor and computer switch to standby mode after a preset time
Axis drives are de-energised
Activation of pneumatic lock and start and stop of dust extractor via potential-free contact
Spindle and electrical cabinet fans are switched off (only on 3, 4 axis machine)
During operation:
Activation of 2nd vacuum pump (if achieved vacuum is insufficient)
C3324''
C25Requires: Safety system
with bumpers and photocell protection on the front of the machine, Safety system
with bumpers, Safety system with safety mats, Alternating mode of operation, C70, C71
C58Protects the machine and cutting tool from starting work if any fence fails to lower.Requires: C135 · Not compatible with: Additional front row of clamps, L + D- 580Applies to 3 rows of clamps for 6 brackets
C147Enable lifting of heavier workpieces (e.g. entrance doors).
C146Instead of standard 4 for 6 bracketsRequires: C135
C148Instead of standard 4 for 6 bracketsRequires: C135 · Not compatible with: 6 lifting bars
C46For one work area.Requires: C135 · Not compatible with: Safety system
with bumpers and photocell protection on the front of the machine, Safety system
with bumpers, Safety system with safety mats, Alternating mode of operation
C49For alternating operation mode.
Note:
Requires options: C40 or C41 or C42 or C43Requires: C135, Safety system
with bumpers and photocell protection on the front of the machine, Safety system
with bumpers, Safety system with safety mats, Alternating mode of operation
C51Requires: Compressed air installation for clamps on 6 consoles, Compressed air installation for clamps on 6 consoles, C135
C481Easier and faster positioning of grippers on the work table.Requires: C135
C60180 m3/h instead of 90 m3/hNot compatible with: More powerful vacuum pump, PRE-PREPARATION for more powerful vacuum pump
C62250 m3/h instead of 90 m3/hNot compatible with: More powerful vacuum pump, PRE-PREPARATION for more powerful vacuum pump
C65Pre-preparation for 180 m3/h instead of 90 m3/hNot compatible with: More powerful vacuum pump, More powerful vacuum pump
C88When tools are changed, the machine automatically measures the length and enters it in the table.
C87Mounted close to left storage.Requires: C80 · Not compatible with: Separate storage position for chip collector
C82Travels with the console in X directionRequires: C80 · Not compatible with: Chip collector, Separate position for circular saw
C197Travels with the console in X directionNot compatible with: Separate storage position for chip collector
C198Positioned on the rear side of the moving bridge.
Tool change is fast and is performed without moving the machine along the X axis.Not compatible with: C84, C85, Preparation for rear storage, Additional rotary tool storage rear movable
C19618 positionsNot compatible with: C84, C85, Preparation for rear storage, Additional linear tool storage with 4 positions
C195Applies to storage with 18 and 4 positions. Electrical and pneumatic installation on the machine for possible subsequent installation of rotary storage. Image shows already installed and connected storage.Not compatible with: C84, C85, Additional rotary tool storage rear movable, Additional linear tool storage with 4 positions
C240For protection of standard storage with 12 positions.
C35- With just 1 unit (with ET interface) you can use up to 3 tools in one CNC program (e.g. saw, blade, cutter, drill).
- You program in between pauses
C36This storage location on the standard linear tool changer can be used as a pickup point for hard-to-reach change positions.
Sensor monitoring minimizes operator errors by preventing tool removal to an already prepared position and thus preventing collision.
C200For protection of standard storage with 12 positions.
008Motor power 15 kW
Up to 24 000 revolutions per minute
HSK F63
5 axis universal head
ceramics bearings with liquid cooling
With height-guided dust extraction hood
C91Mechanical lock of axes C and A during operation.
For heavy loads and maximum machining accuracy.
C105
C189Not compatible with: 191, Larger drilling unit - 30 spindles
C191DH20 8H 2S
12 vertical units
8 horizontal units
(Instead of standard DH 18 6H 1S)Not compatible with: Machine without boring unit, Larger drilling unit - 30 spindles
C192DH30 8H 2S
22 vertical units
8 horizontal units
(Instead of standard DH 18 6H 1S)Not compatible with: Machine without boring unit, Larger drilling unit - 20 spindles
C401
C402
C418
420Required for projector operation with F4Integrate software
422Enables automatic program generation for Clamex P.
90° angles only.
423Enables automatic program generation for Clamex P.
For all angles.
C450For window profile production
C452For semicircular window production.
300-1063 pieces
300-05-910Dimensions (length x width x height)
140 x 115 x 100 mm
300-05-911Dimensions (length x width x height)
125 x 75 x 100 mm
300-05-914Dimensions (length x width x height)
120 x 50 x 100 mm
300-05-916120 x 50 x H=100 mm
360° rotatable
300-05-917Dimensions (length x width x height)
130 x 30 x 100 mm
301-12055-105 mm
301-12555-105 mm
Workpiece clamping with compressed air via console buttons.
301-132Opening 0–140 mm.
Workpiece clamping with compressed air via buttons on brackets.