Unitek Excel

Other

• 1Increased motor power25KM (18.6kW)
• 2Main motor with adjustable sanding belt speed via inverter
• 3Adjustable feed speed via frequency controllerRequired when using touchscreen control panel
• 4Oscillating air nozzles for cleaning sanding paper with timed activation2 pieces
• 5Unit with brush at outlet for panel cleaningMotor power 1.5 HP (1.1 kW)
• 6Unit with SCOTCH BRITE brush at outlet for polishing lacquered panelsMotor power 1.5 HP (1.1 kW)
• 7Unit at outlet with Tynex or steel brush, 1100 mm, granulation to choice, motor power 4 HP (3 kW)On request, motor can be increased to 5.5 HP (4 kW)
• 8Vacuum table for easier feeding of lacquered/smooth and shorter workpieces(3 HP)
• 9Automatic opening of feed table in case of force(Protects the machine from damage)
• 10Error reporting system on the machineDisplay on the front of the machine with LED lights, already included in the price - Touch Screen control panel Reports the following errors: - thermal protection activated - safety switch pressed - front bar for limiting workpiece thickness is activated
• 11Additional pad - softis already included in case of ordering pneumatic pad with time control
• 12Pneumatic pad with time controlincludes additional semi-hard pad
• 13Segmented electronic pad width 1100 mmN20 = 20 segments, 55 mm
• 14Segmented electronic pad width 1350 mmN24 = 24 segments, 55 mm
• 15Segmented electronic pad width 1100 mmN40 = 40 segments, 27.5 mm
• 16Segmented electronic pad width 1350 mmN 48 = 48 segments, 27.5 mm
• 17Time control for soft roller
• 18Mechanical grit setSystem for rapid positioning adjustment of the sanding roller relative to the abrasive paper thickness, 6 positions, pneumatic engagement (for 2 rollers)
• 19Infeed table with 4 rollers instead of two(Front + rear)
• 20Infeed or outfeed table with retractable support roller up to 500 mm length(for one table)
• 21Foot pedal for raising/lowering the working table
• 22Control unit with 12" touchscreen for machine operation(PLC controller) Enables the following functions: - storage of working programs - adjustment of feed belt speed - adjustment of sanding belt speeds (if frequency converter is on the motor) - motor on/off - roller disengagement - blower timer - segmented buffer adjustment - Slovenian translation of all menus and messages
• 23Attachment for increased maximum working thickness 200 mm
• 24Roller hardness replacement(first roller soft 50SH, second roller steel for calibration)
• 25Increased working sanding width from 1100 mm to 1350 mm
• 26Machine version for inline processing with fixed working tableUpper part of the machine moves
• 27Planing head in place of the first unit in exchange for roller(roller diameter 180 mm, interchangeable inserts, dedicated motor 20 HP/15 kW)
• 28Machine version with extended sanding belts from 2150 to 2620 mm(abrasive paper lifespan is extended by the square of the belt length extension)
• 29Attachment for additional second motor with power 20 HP (15 kW)total of 2 motors
• 30Smooth feed belt without groovesVacuum table must be added. Suitable for sanding thin panels or veneers.
• 30Main motor with two speeds13 HP/20 HP Two-speed motor is suitable for calibrating (18 m/s) and quality sanding of sensitive materials (10 m/s).
• 30Main motor with two speeds9.5 HP/14 HP Two-speed motor is suitable for calibrating (18 m/s) and quality sanding of sensitive materials (10 m/s).
• 30Pressure shoes front and rear of independent roller(not available for roller in combined unit assembly), kit for 1 roller